Skip to main content
ARS Home » Pacific West Area » Parlier, California » San Joaquin Valley Agricultural Sciences Center » Commodity Protection and Quality Research » Research » Publications at this Location » Publication #258396

Title: Developing Postharvest Disinfestation Treatments for Legumes Using Radio Frequency Energy

Author
item WANG, SHAOJIN - Washington State University
item TIWARI, G - Washington State University
item JIAO, SHUNSHAN - Washington State University
item Johnson, Judy
item TANG, JUMING - Washington State University

Submitted to: ASABE Annual International Meeting
Publication Type: Proceedings
Publication Acceptance Date: 3/15/2010
Publication Date: 6/30/2010
Citation: Wang, S., Tiwari, G., Jiao, S., Johnson, J.A., Tang, J. 2010. Developing Postharvest Disinfestation Treatments for Legumes Using Radio Frequency Energy. ASABE Annual International Meeting. June 20-23, 2010, Pittsburgh, PA. Paper No. 1008320. ASABE. St. Joseph, MI, USA 10p.

Interpretive Summary:

Technical Abstract: There is an urgent need to develop technically effective and environmentally sound phytosanitary and quarantine treatments for the legume industry to replace chemical fumigation. The goal of this study was to develop practical non-chemical treatments for postharvest disinfestations of legumes using radio frequency (RF) energy. A pilot-scale 27 MHz, 6 kW RF unit was used to investigate RF heating and consequent quality attributes in treated chickpea, green pea, and lentil samples. Only 5-7 min was needed to raise the central temperature of 3 kg legume samples to 60°C using RF energy, compared to more than 275 min when using forced hot air at 60°C. RF heating uniformity in product samples was improved by adding forced hot air, and back and forth movements on the conveyor at 0.56 m min-1. The final temperatures exceeded 55.8°C in the interior of the sample container and 57.3°C on the surface for all three legumes, resulting in low uniformity index values of 0.014-0.016 (ratio of standard deviation to the average temperature rise) for the interior temperature distributions and 0.061-0.078 for surface temperature distributions. RF treatments combined with forced hot air at 60°C to maintain the target treatment temperature for 10 min followed by forced room air cooling through a 1 cm product layer provided good product quality. No significant differences in weight loss, moisture content, colour or germination were observed between RF treatments and unheated controls.