Page Banner

United States Department of Agriculture

Agricultural Research Service

RETC Model
headline bar

The program, examples, and manual
can be downloaded from the
software download area.
 

Year: 1991, 1998
Versions: DOS, Windows

Abstract:

RETC is a computer program which may be used to analyze the soil water retention and hydraulic conductivity functions of unsaturated soils. These hydraulic properties are key parameters in any quantitative description of water flow into and through the unsaturated zone of soils. The program uses the parametric models of Brooks-Corey and van Genuchten to represent the soil water retention curve, and the theoretical pore-size distribution models of Mualem and Burdine to predict the unsaturated hydraulic conductivity function from observed soil water retention data. The program comes with a manual which gives a detailed discussion of the different analytical expressions used for quantifying the soil water retention and hydraulic conductivity functions. A brief review is also given of the nonlinear least-squares parameter optimization method used for estimating the unknown coefficients in the hydraulic models. The RETC program may be used to predict the hydraulic conductivity from observed soil water retention data assuming that one observed conductivity value (not necessarily at saturation) is available.

The program also permits one to fit analytical functions simultaneously to observed water retention and hydraulic conductivity data. Several examples are presented to illustrate a variety of program options.

The program comes with a user manual giving detailed information about the computer program along with instructions for data input preparation and listings of sample input and output files. A listing of the source code is also provided.
 

References:

van Genuchten, M. Th., F. J. Leij, and S. R. Yates. 1991.
The RETC Code for Quantifying the Hydraulic Functions of Unsaturated Soils, Version 1.0. EPA Report 600/2-91/065, U.S. Salinity Laboratory, USDA-ARS, Riverside, California.
 

Contact:

The program and manual are available upon request from:
Walter Russell
USDA-ARS U.S. Salinity Laboratory
450 W Big Springs Road
Riverside, CA 92507-4617

Tel: 951-369-4850
Fax: 951-342-4964
Walt.Russell@ars.usda.gov

Technical contact:
Todd Skaggs
USDA-ARS U.S. Salinity Laboratory
450 W Big Springs Road
Riverside, CA 92507-4617

Tel: 951-369-4853
Fax: 951-342-4964
Todd.Skaggs@ars.usda.gov

 


Last Modified: 5/14/2012
Footer Content Back to Top of Page