Skip to main content
ARS Home » Southeast Area » Auburn, Alabama » Soil Dynamics Research » Research » Publications at this Location » Publication #427996

Research Project: Sustaining Productivity and Ecosystem Services of Agricultural and Horticultural Systems in the Southeastern United States

Location: Soil Dynamics Research

Title: Trencher for subsurface banding: Soil forces and crop residue shearing performance

Author
item CELIK, AHMET - Ataturk University
item Way, Thomas
item Watts, Dexter

Submitted to: Applied Engineering in Agriculture
Publication Type: Peer Reviewed Journal
Publication Acceptance Date: 6/8/2026
Publication Date: N/A
Citation: N/A

Interpretive Summary: Broiler chicken litter is a mixture of chicken manure and a bedding material. This litter is a solid material and is commonly used as a fertilizer on pastures and cropland. A prototype field implement was developed at the USDA-ARS National Soil Dynamics Lab (Auburn, AL). The implement uses trenchers, forming shallow soil trenches, and applies litter in subsurface bands. We investigated performance of a trencher from the implement on a soft sandy loam soil and a clay soil. Draft is the longitudinal force needed for pulling the trencher through the soil. Trencher draft on the clay soil was typically greater at a 75 mm trenching depth than at a 50 mm depth. The upward vertical force applied by the sandy loam soil on trencher was typically greater at the 75 mm depth than at the 50 mm depth.

Technical Abstract: A trencher assembly for shallow subsurface banding of poultry litter and other solid soil amendment materials was run on a soft sandy loam soil and a clay soil. On both soils we investigated the trencher performance while cutting through crop residues which rested on the soil surface. The crop residues on the sandy loam were corn, cotton, soybean, and wheat. Those on the clay were corn and wheat. The trencher assembly draft on the clay soil with a no residue bare soil surface, and with corn residue and wheat residue resting on the soil surface, was significantly greater at 75 mm trenching depth than at 50 mm depth. On the sandy loam, the upward vertical forces applied by the soil on the trencher assembly for the no residue condition and the cotton, soybean, and wheat residues at the 50 mm depth were significantly less than the vertical forces for corn and wheat at the 75 mm depth. When the trencher assembly encountered soybean, cotton, corn, and wheat residue stems resting on the sandy loam soil surface, the overall mean percentage of residue stems which were sheared was 73.6% at the 50 mm depth and 64.2% at the 75 mm depth. On the sandy loam, averaged across the two depths, the 91.1% and 88.0% percentages of residue stems which were sheared, for the soybean and cotton residues, respectively, were significantly greater than the 53.3% and 43.3% percentages for the corn and wheat residues, respectively.