Location: Soil Dynamics Research
Title: Single-disk and double-disk openers: Soil forces and crop residue shearing performanceAuthor
![]() |
CELIK, AHMET - Ataturk University |
![]() |
Way, Thomas |
![]() |
Watts, Dexter |
|
Submitted to: Soil and Tillage Research
Publication Type: Peer Reviewed Journal Publication Acceptance Date: 6/9/2026 Publication Date: 6/18/2026 Citation: Celik, A., Way, T.R., Watts, D.B. 2026. Single-disk and double-disk openers: Soil forces and crop residue shearing performance. Soil and Tillage Research. 264:107326. https://doi.org/10.1016/j.still.2026.107326. DOI: https://doi.org/10.1016/j.still.2026.107326 Interpretive Summary: Steel disks, known as openers, operate at shallow depths in the soil and are important components of row crop planters and grain drills, for planting crops. The openers are designed to cut through crop residue, which is plant material, on the soil surface, and to cut a furrow in the soil, into which the seeding device of the planter or drill places the seed. A single-disk opener and a double-disk opener were run on a soft sandy loam soil, a firm sandy loam soil, and a clay soil. On both sandy loam soil conditions, we investigated the performance of the openers on a bare soil surface and while cutting through three crop residues which rested on the soil surface. The crop residues were corn, soybean, and wheat. On the clay we used a bare soil surface and forward velocities of 1.9, 3.0, 4.1, and 5.1 km/h. Draft is the longitudinal force needed to move an opener forward. For the single-disk opener on the clay, the draft and the vertical force of the soil pushing upward on the opener, at 50 and 75 mm operating depths, increased as forward velocity increased. The vertical force for the double-disk opener on the clay at the 75 mm depth increased as forward velocity increased. The double-disk opener exhibited very good performance in shearing the crop residue stems. Technical Abstract: A single-disk opener and a double-disk opener were run on a soft sandy loam soil, a firm sandy loam soil, and a clay soil. On both sandy loam soil conditions, we investigated the performance of the openers on a bare soil surface and while cutting through three crop residues which rested on the soil surface. The crop residues were corn (Zea mays L.), soybean (Glycine max (L.) Merr.), and wheat (Triticum aestivum L.). On the clay we used a bare soil surface and forward velocities of 1.9, 3.0, 4.1, and 5.1 km/h. The draft of the single-disk opener and the double-disk opener on the firm sandy loam and on the clay was significantly greater at a 75 mm depth than at a 50 mm depth. The draft on the soft sandy loam was not significantly affected by depth. On the clay, the draft for the single-disk opener was significantly less than that for the double-disk opener. The double-disk opener exhibited very good performance in shearing the crop residue stems because the opener had two disks contacting the residue simultaneously and as the movement of the disks relative to the soil occurred, those cutting edges of the two disks spread apart in the lateral direction, thereby promoting shearing. The draft and vertical force for the single-disk opener on the clay at 50 and 75 mm depths, and the side force at the 75 mm depth, increased as forward velocity increased. The vertical force for the double-disk opener on the clay at the 75 mm depth increased as forward velocity increased. |
