Skip to main content
ARS Home » Northeast Area » Beltsville, Maryland (BARC) » Beltsville Agricultural Research Center » Hydrology and Remote Sensing Laboratory » Research » Publications at this Location » Publication #415835

Research Project: From Field to Watershed: Enhancing Water Quality and Management in Agroecosystems through Remote Sensing, Ground Measurements, and Integrative Modeling

Location: Hydrology and Remote Sensing Laboratory

Title: Resolving the hydrologic signature of water spreader berms in the US Southwest

Author
item Crompton, Octavia
item Nichols, Mary
item Lapides, Dana
item XU, HAIQING - University Of Arizona

Submitted to: Journal of Soil and Water Conservation
Publication Type: Peer Reviewed Journal
Publication Acceptance Date: 2/14/2024
Publication Date: 5/1/2024
Citation: Crompton, O.V., Nichols, M.H., Lapides, D.A. 2024. Vegetation response to rangeland water manipulation structures in the US Southwest. Catena. 79:155-165. https://doi.org/10.2489/jswc.2024.00086.
DOI: https://doi.org/10.2489/jswc.2024.00086

Interpretive Summary: In the western US, many runoff and erosion control structures, such as earthen water spreader berms, have been built since the early-1900s to manage surface runoff and mitigate rangeland degradation. These structures aim to enhance soil moisture and promote vegetation growth by altering surface topography to control high-velocity overland flows. The impact of these berms on vegetation is visually evident in aerial photographs, showing distinct vegetation patches upslope and reduced vegetation downslope. However, these impacts had not been quantitatively assessed. By evaluating the Soil Adjusted Vegetation Index (SAVI) around 210 berms in Altar Valley, Arizona, the study found significant SAVI enhancement upslope, extending approximately 60 meters, and minor effects downslope, extending to about 120 meters, highlighting the berms' significant influence on nearby vegetation and the value of high-resolution data in conservation planning.

Technical Abstract: In an attempt to restore degraded rangelands in the western United States, thousands of water and erosion control structures such as earthen water spreaders and contour berms were built in the mid 1900s to control runoff and sediment. Although many were installed by the newly formed USDA Soil Conservation Service, many others were designed without the benefit of local hydrologic data or technical design guidance. As a result, there is a wide range in the efficacy of these structures, and in many cases, the current status of hydrologic process interactions is unknown. In addition, structurally compromised, abandoned, and unmaintained structures are now interacting with runoff and sediment contrary to their intended purpose, in some cases exacerbating erosion. Because these structures are typically small relative to the resolution of available topographic data, they are not generally accounted for in runoff simulation models. Recent years have marked the increasing availability of LiDAR-based topographic data of sufficiently high resolution to incorporate water and erosion control structures in the digital elevation models underpinning hydrologic models. However, beyond the challenges of data acquisition, modeling tools capable of resolving berm topographies and characterizing their hydrologic impacts are needed. Here, the potential hydrologic impacts of water spreader berms are simulated in virtual experiments using a rainfall-runoff model (specifically, the Saint Venant Equations). The model simulations characterize the local and hillslope-scale effects of berms across a range of storm intensities, landscape attributes, and berm shapes while accounting for berm topography and elevated soil permeability upslope of berms in response to vegetation growth. We demonstrate how berms alter surface runoff and create spatially varied runoff patterns, and describe the impact of berm removal on re-establishing connectivity patterns.