Page Banner

United States Department of Agriculture

Agricultural Research Service


item Hanson, Gregory
item Cook, Kevin
item Hahn, Will

Submitted to: American Society of Agricultural Engineers Meetings Papers
Publication Type: Proceedings
Publication Acceptance Date: 5/15/2002
Publication Date: 7/28/2002
Citation: Hanson, G.J., Cook, K.R., Hahn, W. 2002. Image-based erosion measurement technique. American Society of Agricultural Engineers Meetings Paper No. 022163.

Interpretive Summary:

Technical Abstract: Two and three - dimensional analysis using close range digital photographs can be very useful in measuring changes in erosion on the landscape. Computer software exists for conducting photographic analysis but is often either cost prohibitive or very labor intensive to use. This paper describes a simple 2-D image-based technique used to conduct simple measurements photographically using software that would already typically be in use in an engineering office (i.e. CAD, image editing, and spreadsheet programs). The technique allows for the collection of a significant amount of supplemental information that can be analyzed in the office when time allows. The technique is very repeatable and results in reliable measurements when compared to actual physical measurements. The accuracy of using these measurements was evaluated. The standard error was 17 mm with a coefficient of determination of 0.99 for the linear regression. The overall mean absolute deviation of residuals was 18 mm and the maximum absolute residual was 52 mm. The application selected for this paper is the documentation of headcut location and breach width opening during an embankment-overtopping test. This technique was demonstrated to be an effective method for measuring distances and locations on the landscape.

Last Modified: 10/16/2017
Footer Content Back to Top of Page