Page Banner

United States Department of Agriculture

Agricultural Research Service

Research Project: DEVELOPMENT OF SAFE, EFFICIENT ENGINEERING MEASURES FOR DESIGN, ANALYSIS, AND REHABILITATION OF HYDRAULIC STRUCTURES AND CHANNELS

Location: Hydraulic Engineering Research

Title: Webinar: Stepped chute design for embankment dams

Author
item Hunt, Sherry

Submitted to: State Dam Safety Officials Association Proceedings
Publication Type: Other
Publication Acceptance Date: July 8, 2014
Publication Date: July 8, 2014
Citation: Hunt, S.L. 2014. Webinar: Stepped chute design for embankment dams. In: State Dam Safety Officials Association Archives and CD-ROM, July 8, 2014. Webinar. http://www.damsafety.org/resources/bibliography/?p=0102393e-7e29-4e01-b778-b0c750418f26&db=ASDSO&rec=5923.

Technical Abstract: Changing demographics in the vicinity of dams have led to hazard creep in a number of dams worldwide. Many of these dams now have insufficient spillway capacity as a result of these changes in hazard classification from low to significant or high hazard. Stepped chutes applied to the embankment dams offer an advantage by providing increased spillway capacity. This webinar provides an overview on stepped chute research conducted at the USDA-Agricultural Research Service (ARS) Hydraulic Engineering Research Unit in Stillwater, OK. Scientists have developed relationships and compared them to those available in literature for the design of stepped chutes applied to embankment dams. People who take this course will learn the following information regarding stepped chute design: 1). Background and basis for stepped chute research and the development of design relationships with regards to the USDA. 2). Methods for determining the inception point location, flow depth, clear-water flow depth, average air concentration, bulked flow depth, and energy coefficient. 3). Impact parameters like unit discharge, step height and chute slope have on training wall height and stilling basin design requirements. 4). Use of USDA-ARS methods for design of stepped chutes (Design example). 5). Discussion of designing converging stepped chutes. 6). Future research needs: Training wall height requirements for containing splash, Stilling basin design for non-converging and converging chutes.

Last Modified: 10/24/2014
Footer Content Back to Top of Page