Submitted to: ASABE Annual International Meeting
Publication Type: Proceedings
Publication Acceptance Date: July 10, 2010
Publication Date: July 15, 2010
Citation: Yang, C. 2010. An airborne four-camera imaging system for agricultural applications. ASABE Annual International Meeting. ASABE paper no. 1008856. Interpretive Summary: This paper describes the design and testing of an airborne multispectral digital imaging system for remote sensing applications. The system can acquire high-resolution digital images with 2048 x 2048 pixels in four spectral bands in the visible to near-infrared region of the spectrum. Both ground and airborne experiments showed that the system performed well and was reliable. The images acquired from a root rot-infected area, citrus groves, a giant reed-infested site, a saltcedar-infested site, and a mangrove wetland area demonstrated that imagery from this high resolution four-camera imaging system can be used for monitoring crop pest and growing conditions, mapping invasive weeds, and assessing wetland ecosystems.
Technical Abstract: This paper describes the design and testing of an airborne multispectral digital imaging system for remote sensing applications. The system consists of four high resolution charge coupled device (CCD) digital cameras and a ruggedized PC equipped with a frame grabber and image acquisition software. The cameras are sensitive in the 400 to 1000 nm spectral range and provide 2048 × 2048 active pixels with 12-bit data depth. A 24 mm lens is attached to each camera via an F to C mount adapter, resulting in an imaging size of 0.63 times the flight altitude. The four cameras are equipped with blue (430-470 nm), green (530-570 nm), red (630-670 nm), and near-infrared (NIR) (810-850 nm) bandpass interference filters, respectively, but have the flexibility to change filters for desired wavelengths and bandwidths. The cameras are arranged in a quad configuration and attached to adjustable mounts that facilitate aligning the cameras horizontally, vertically, and rotationally. The image acquisition software allows the synchronized black-and-white band images from the cameras to be viewed on the computer monitor in any one of the four modes: a quad, one band image at a time, a normal color composite, or a color-infrared (CIR) composite. The band images are refreshed continuously to allow the operator to selectively save images with correct areas of interest. The selected four-band composite image is saved as a tiff file and consecutive images can be saved in 1-s intervals. A band-to-band alignment procedure based on the first order transformation was presented to further align the four band images. The system performed well in both stationary and airborne testing conditions. Airborne images obtained from agricultural fields, rangelands, and waterways demonstrate that this system has potential for monitoring crop pest conditions, mapping invasive weeds and assessing natural resources.