Meadowfoam in full bloom.
A Mission of Innovation
"Biobased industrial product research"these are some
of today's hottest topics. But ARS isn't some Johnny-come-lately, suddenly
jumping on the biobased bandwagon. From the agency's earliest days,
ARS has made developing new industrial products from agricultural crops
an essential part of its mission. Epoxy resins from sugar, packing-peanuts
from cornstarch, 100-percent soybean printing ink, and industrial lubricants
from meadowfoam and other oilseeds are all as much a part of ARS as
new tomato varieties and better irrigation systems.
Sometimes ARS' biobased product research has been about replacing a
petroleum source, such as with the synthetic rubber. Other times, the
agency's research has created the basis for whole new industriesfor
completely new products.
A good example is the invention of Super Slurper, a chemical marriage
between cornstarch and a synthetic compound, which can absorb nearly
2,000 times its own weight in moisture. Super Slurper is used in batteries,
fuel filters, baby powders, wound dressings, soil conditioners, and
seed coatings. Compounds very much like it are also used in disposable
diapers and sanitary napkins.
Chemist Sevim Erhan
soybean oil inks for
laboratory printing tests.
Any time a renewable resource can be tapped to produce a product that
is as effective and economically competitive as the synthetic, everyone
gains. Farmers benefit from new markets; the environment benefits from
biodegradable or renewable-sourced products; the country becomes less
dependent on imported petroleum; and consumers get new, useful goods.
Take packing peanuts, for example. Everyone wonders what to do with
those ubiquitous pieces of polystyrene that last forever. In the 1970s,
ARS scientists at NCAUR developed a material made from starch that could
be used to make biodegradable packing peanuts and similar products.
But getting it to market has been a long road.
It often takes 15 to 20 years for a new material to be accepted and
adopted by industry.
Today, Uni-Star Industries, Ltd., in Marion, Arkansas, makes starch-based
resins that end up as 2 million cubic feet of biodegradable loose fill
each year. They use a starch-grafting process that has its roots directly
in the ARS-developed technology.
"If you put a packing peanut from our material under a faucet
or drop it in a glass of water, it will just dissolve away," explains
Don Fisk, director of technology for Uni-Star Industries.
"But that 2 million cubic feet made from our materials is only
about 10 percent of the packing-peanut market. Achieving market acceptance
from manufacturers used to a different raw material is not easy,"
he adds. "Manufacturers have an investment in machinery that handles
the existing material well. Why should they change?"
To entice acceptance, it has been essential to make starch-based "polystyrene"
not only workable, but also economically competitive with synthetics,
regardless of its environmental benefits. Fisk continues to improve
the production process, and he expects to gain more market share as
costs decrease and his product line expands.
Feathering New Nests
To help speed industry's adoption of a new biobased technology, ARS
scientists' work doesn't stop with publishing results. Along with the
agency's Office of Technology Transfer, they can actively reach out
to interest businesses and entrepreneurs in the commercial potential
of the research. Once an agreement or patent license is signed between
ARS and a company, the agency's researchers often continue to help solve
the host of complications that occur between an initial pilot-plant
design and production of viable commercial end-products.
For example, ARS chemist Walter Schmidt with the Environmental Quality
Laboratory in Beltsville, Maryland, developed and patented a process
that converts chicken feathersa low-value waste product of the
poultry industryto a source of high-value fibers. Strong as nylon
and finer than wood pulp, these fibers have potential as a renewable,
recyclable resource to manufacture everything from insulation to municipal
water filters, from stationery to car dashboards. They may even be able
to clean up radioactive waste.
Schmidt has put in many hours discussing the potential for feathers
as industrial products or components of products with prospective commercializers.
"Twelve different companies expressed interest in the patent,"
Since 1998, when Tyson Foods, Inc., Springdale, Arkansas; Maxim, LLC,
Pasadena, California; and Featherfiber Corp., Nixa, Missouri, licensed
the technology, Schmidt has helped the three companies figure out how
to scale up the lab process to a pilot-plant level of commercial production.
At the same time, he's been helping to build market credibility for
a new industrial biobased resource.
Explains Maxim's company president and CEO Carlo Licata, "We could
not have gotten off the ground without ARS' research. But more than
that, ongoing guidance from Walter Schmidt has been a major asset in
making feather fiber work. Walter has kept it from becoming so frustrating
that I gave up on feather fiber. Starting an industry like this isn't
an easy task."
Licata is currently concentrating on feather fiber's unusually high
potential as an absorbent of heavy metals. He is planning to market
feather fiber in three major areas. The first is as a filter for municipal
water, capable of removing even nanosized particles. "It can even
remove chromium 6 from drinking water," he says.
The second is as an industrial absorbent of heavy metals in soil and
water. "And even better, I can release the heavy metals from the
fibers afterwards, so the metals can be recycled," he says.
Third, Licata has discovered that feather fiber has a great affinity
for absorbing radioactive strontium and cesium. "We are ready to
try a demonstration project to show that feather fiber can clean up
hotradioactivematerial," Licata says.
Feather fiber has incredible product potential as a renewable source,
"provided we can create a market for it," he adds.
One day, feather fiber may be as big an industry as another ARS success
storyflexible polyvinyl chloride (PVC). In the late 1940s, vinyl
plastics were unstable in sunlight, quickly became brittle, and required
the use of poisonous stabilizers. But researchers at the ARS Eastern
Regional Research Center in Wyndmoor, Pennsylvania, discovered that
by inserting an atom of oxygen into unsaturated fatty acids, they created
stable, flexible vinyl. Today, roughly 50,000 tons a year of flexible
PVC go into miles of hoses, floor coverings, even plastic tablecloths,
still based on the original ARS chemistry.By J.
Kim Kaplan, Agricultural Research Service Information Staff.
This research is part of Quality and Utilization of Agricultural
Products, an ARS National Program (#306) described on the World Wide
Web at http://www.nps.ars.usda.gov.
To reach people mentioned in this article, contact J.
Kim Kaplan, USDA-ARS Information
Staff, 5601 Sunnyside Ave., Beltsville, MD 20705-5128; phone (301)
504-1637, fax (301) 504-1648.