|Management Options for Control of Irrigation-Induced Erosion|
by R.E. Sojka - Presented at Idaho Potato School on January 25, 1996. The Severity of Irrigation-Induced Erosion Irrigation-induced erosion is a threat both to the sustainability of irrigated agriculture and to global food security. Arid zone soils are usually low in organic matter and poorly aggregated, with thin, easily eroded A horizons. Carter (1993) demonstrated that, once eroded, yield potentials of PNW soils are severely reduced (Table 1). Furthermore, furrow irrigation, used on much of the world's irrigated land, is an inherently erosive process.
Soil Conservation Practices for Irrigated AgricultureMost of the initial impetus for soil conservation in irrigated agriculture was protection of riparian areas receiving irrigation return flows. This led to an early strategy focused mainly on sediment settling basins in return flow systems. Subsequently, efforts concentrated on the prevention of soil loss from the farm. A parallel goal of both of these containment strategies was to return captured sediment to the eroded sites on farm land. Current research emphasis represents a shift from engineering practices toward development of soil, water and crop management practices that are aimed at halting all soil movement, thereby retaining soil in place, eliminating subsequent soil handling or transport. Because each farm is unique, a given sediment containment practice may not be equally suited to all situations. Farmers determine which practice or practices suit their situation. Ultimately, erosion abatement practices that are used are more valuable than practices that are not used, regardless of the relative potential effectiveness of a given practice. Enforcement of clean water standards may eventually demand that return flows leaving a farm meet specified water quality standards. These standards may be voluntary standards or may be tied to potent financial incentives or disincentives. Below is a brief summary of some of the more important conservation practices that have been developed for irrigated agriculture. They differ in ease of adoption, effectiveness, and cost of implementation, but offer a range of options to suit most situations. These practices and related factors have been discussed in greater detail in several recent publications (Carter, 1990; Carter et al., 1993; Sojka and Carter, 1994).
Sediment Retention Basins:Sediment ponds can be large, perhaps 1/4 acre, servicing a 40-60 acre field, or small "mini-basins" that temporarily pond runoff for only 6-12 furrows. The basins reduce flow rates and briefly retain water, allowing deposition of suspended particulates and reducing desorption of phosphorous. Retention basin effectiveness depends on sediment load, inflow rates, retention time, and texture of suspended particulates. About 2/3 of solids can be removed from return flows, but only about 1/3 of the suspended clay and total P (Brown et al., 1981). Clay, where most adsorbed P resides is slow to sink to the pond floor. Thus, the practice is more effective for medium textured soils, than for clayey soils.
Buried-pipe Erosion Control Systems:Buried drain pipes with vertical inlet risers allow Furrow irrigation tail water to pond at the bottom of fields until the water level initiates drainage into the riser. These systems promote sediment retention much as ponds do, and are often an adjunct to mini-basins. The method is best suited to elimination of concave field ends. Effectiveness is near 90% while concavities or basins are filling, but drops to pond efficiencies once depressions are filled (Carter and Berg, 1983).
Vegetative Filter Strips:Cereal, grass, or alfalfa strips (10-20 feet wide) sown along the lower ends of furrow irrigated row crop fields reduce sediment in runoff 40-60%, provided furrows are not cut through the filter strip area. Harvested filter strips yield 30-50% below normal for the strip crop (Carter et al. 1993).
Twin row and Close Row Planting:Planting corn as close as possible to both sides of an irrigated furrow to form twin row spacings halved field sediment loss in two years of observation (Sojka et al., 1992). Results for single but narrower than normal row spacings were more variable but showed promise for corn, sugarbeet and field beans. The effect results from a combination of factors including soil binding by roots in close proximity to the flow, introduction of plant litter into the furrow stream, and (with narrow rows only) systematic increase in furrow numbers (and hence wetted perimeter), thus reducing the irrigation set duration needed to deliver equivalent quantities of water. This reduces the runoff stream size and runoff period relative to the total inflow.
Tailwater Reuse:Retention ponds can be inexpensively enhanced to recirculate sediment-laden water into the furrow irrigation water supply. This does not halt or slow erosion per se, but largely automates replacement of sediment onto the fields from which they came. Advantages include maximizing water supply efficiency and 100% on farm sediment retention (Carter et al, 1993). Capital and energy cost and accelerated pump wear are disadvantages. There is also mingling of disease inoculum, weed seed, and chemicals, although these occur where return flows are reused anyway. On a larger scale, however, many surface irrigation districts have been engineered and are operated with an assumption of return flows making part of the irrigation supply for large portions of the district. Elimination of all return flows could dry up some reaches of existing systems or require modification of primary canal capacity to provide water to farms on lower reaches of the delivery system if some water is not routed through return flow systems.
Improved Water Management:Improved inflow/outflow management, stream size monitoring (post-advance flow reduction), field leveling, alternate furrow irrigation, infiltration measurement (soil water budget monitoring) and irrigation scheduling (furrow or sprinkler), can all improve water use efficiencies. These changes could reduce water application and hence, runoff amounts, reducing erosion as a side benefit (Trout et al., 1994).
Furrow Mulching:Use of plant residue or living mulches in irrigation furrows can be very effective at halting erosion. Permanent furrow sodding halted nearly 100% of erosion (Cary, 1986) without adverse yield effects in barley, wheat, beans and corn. The technique required a special furrow cutter to maintain established furrows. Straw or other manageable residues can be selectively placed in furrows producing 52-71% sediment loss reduction (Miller et al., 1987; Aarstad and Miller, 1981; Brown, 1985; Brown and Kemper, 1987). Drawbacks of these techniques include large increases in advance times and infiltration rates, and the addition of field operations for establishment and/or maintenance of the mulches. Mulching can occur at inconvenient times for crop managers, or cause problems during cultivation. Straw also sometimes moves in furrow streams, damming furrows and causing water to flow over rows into adjacent furrows.
Whey Application:Some irrigated areas are near dairy processing plants. For many processors disposal of acid cottage cheese whey is a problem. Soil-applied acid whey accelerates remediation of exposed lime subsoils and conserves nutrients, using an agricultural byproduct. If combined with straw application, whey can reduce furrow irrigation-induced erosion as much as 98 % and increase infiltration over 20 % (Robbins and Lehrsch, 1992; Brown and Robbins, 1995; Lehrsch and Robbins, 1994). The disadvantages of this approach are the cost and inconvenience of bulk hauling and field application of the whey. Usually processors, who often need land application sites, will provide whey at not cost.
Polyacrylamide-Treated Irrigation Water:Treating advancing furrow irrigation water (only) with 10 ppm polyacrylamide (PAM) has reduced sediment loss in runoff 85-99% while increasing infiltration 15% (Lentz et al., 1992; Lentz and Sojka, 1994; Sojka and Lentz, 1993, 1994). This translates to about 1 kg/ha of PAM used per treated irrigation. PAM, an industrial flocculent used for food processing and water treatment, is now marketed extensively for erosion control. Results have been highly consistent on a wide range of soils and conditions, showing high effectiveness, low cost, and lack of major effects on other farming practices (Fig. 1). With 10ppm PAM, initial water inflows can be more than doubled (then cut back once water has advanced across the field), virtually without erosion. This permits greater field infiltration uniformity. Ongoing PAM research by conservationists and manufacturers are rapidly providing better materials and more effective user protocols. Interest has also arisen for use of PAM with sprinkler irrigation.
Water Quality:In recent field research at Kimberly, ID elevated sodium adsorption ratio (SAR) in furrow irrigation water, especially at low electrical conductivity (EC) increased the erosivity of the furrow stream (Lentz et al., 1993, 1996). Sediment in runoff more than doubled when SAR 12 EC 0.5 dS m-1 water was used, compared to SAR 0.7 EC 2.0 dS m-1 water (Fig. 2). Sediment loss increased 1.5 times, compared to Snake River water (SAR 0.7 EC 0.5 dS m-1). Many farms have multiple water sources (e.g. well and canal water) of varying quality. It behooves farmers to use less erosive water on steeper or more erosive ground, and/or to blend waters, where feasible, to reduce erosion hazard. These results demonstrate that process-driven erosion models must consider water quality effects. They also underscore the need to know what water quality is used in erosion simulators for valid data interpretation.
Conservation Tillage:Field-wide erosion reductions of over 90 %, reduced production costs, and, some yield increases have been noted for a range of conservation tillage and no-till cropping systems under furrow irrigation (Carter and Berg, 1991; Sojka and Carter; 1994). Once established, these systems can provide long range, cost-effective erosion elimination. A Disadvantage of this approach is reluctance by many farmers to adopt such all-encompassing changes to their operations. Furrow irrigation needs reasonably uniform and unobstructed furrows for consistent and timely water advance. This sometimes is a problem in residue-intensive systems. Under sprinkler irrigation, conservation tillage can be implemented much as in rainfed systems.
Zone-subsoiling:Because most of the world's irrigated soils have been in production for less than 100 years, compaction has only recently been recognized as a potential problem. Compaction deteriorates soil structure and impedes infiltration. Both impair crop production and contribute to runoff and erosion. Zone-subsoiling improved yield and grade of furrow irrigated potatoes and increased infiltration up to 14% while reducing soil loss in runoff up to 64% (Sojka, et al., 1993a, 1993b). Zone-subsoiling can be used with either furrow or sprinkler irrigation.
Reservoir Tillage:Creating small pits between crop rows (called reservoir tillage, dammer diking or basin tillage) helps prevent or reduce runoff. This technique is suitable both to dryland farming and to sprinkler irrigation, but not to furrow irrigation. Sprinklers used on irregular sloping fields, especially the outer reaches of center pivots where application rates are high, can induce excessive runoff and erosion. Reservoir tillage has eliminated about 90 % of these sprinkler-related runoff and erosion losses (Kincaid et al., 1990).
Low-Pressure Wide-Area Spray Emitters:The geometry of center pivot irrigation systems requires very high instantaneous water application rates in the outermost 1/3 of the pivot. The larger the pivot the worse the problem. By using spray booms and special emitters, smaller drop sizes are spread over a larger area. Energy is conserved and runoff and erosion are greatly reduced compared to standard impact head systems (Kincaid et al., 1990).
Despite great progress in the past twenty five years there is much work left to be done in the area of irrigation-induced erosion. Irrigation-induced erosion is one of the greatest threats to maintaining the sustainability of irrigated agriculture in the Pacific Northwest. There are numerous conservation practices available to farmers. The choices are diverse enough to provide viable conservation alternatives for most irrigated situations capable of reducing erosion by at least 50%. In many instances the cost of erosion control is substantially or completely offset by savings in other farming operations made necessary by erosion, or by improvements in crop yield or quality associated with implementation of the conservation practice.